Snap a chalk line from the high end to the low end on the fascia and set the hangers to the line.
How the gutter calculator works
GutterCalc multiplies the drainage area (gutter length × roof depth) by the pitch factor and the rainfall intensity, then picks the smallest gutter of your style whose capacity is at least that adjusted area. Downspouts = the larger of the gutter length ÷ the maximum run per downspout and the roof area ÷ the downspout capacity, rounded up. Hangers = length ÷ spacing + 1. Slope = ¼ inch (or your figure) per 10 feet over the run to each downspout.
Gutter capacity (adjusted sq ft)
| Gutter | Capacity |
|---|---|
| 5″ K-style | 5,520 |
| 6″ K-style | 7,960 |
| 5″ half-round | 2,500 |
| 6″ half-round | 3,840 |
Pitch factor
| Roof pitch | Factor |
|---|---|
| Flat to 3/12 | 1 |
| 4/12 – 5/12 | 1.05 |
| 6/12 – 8/12 | 1.1 |
| 9/12 – 11/12 | 1.2 |
| 12/12 and steeper | 1.3 |
Downspout capacity (rule of thumb)
| Downspout | Opening | Roof area |
|---|---|---|
| 2 × 3″ rectangular | 6 sq in | ≈ 600 sq ft |
| 3 × 4″ rectangular | 12 sq in | ≈ 1,200 sq ft |
| 3″ round | 7.1 sq in | ≈ 700 sq ft |
| 4″ round | 12.6 sq in | ≈ 1,250 sq ft |
Capacities, pitch factors and the 1 sq in per 100 sq ft downspout rule are widely published rules of thumb for residential gutters, not a code calculation; local codes (for example the plumbing code's storm drainage tables) and your installer may size differently. Results are estimates.
Frequently asked questions
How much slope should a gutter have?
About ¼ inch per 10 feet is common, giving 1 inch over 40 feet.
Can a gutter have too much slope?
Yes. A steep fall looks crooked from the street and can let water overshoot the low end in heavy rain.
How do I slope a long gutter?
For runs over about 40 feet, put a downspout at each end and slope from the middle toward both, or add a downspout in the middle.
Is GutterCalc free?
Yes, with no sign-up or ads.
Are my measurements saved?
Yes, in this browser only.